|
Research
Activities : |
| Sl. No. |
Project |
Funded by |
Duration |
| 1. |
‘Study on methods of improving the performance of combined gas & steam turbine plants’ |
All India Council for Technical Education, Government of India |
Three years |
| 2. |
‘Experimental investigations on transpiration cooling for gas turbine blades’ |
SERC, Deptt. of Science & Technology, Government of India under SERC Fast Track Proposal |
Three years |
| 3. |
‘Real time integrity monitoring of composite materials using magnetostrictive (MS) materials’ |
All India Council for Technical Education, Government of India |
Two years |
| 4. |
‘Performance evaluation and life cycle analysis of Biodiesel from low value industrial by-products’ |
All India Council for Technical Education, Government of India |
Two Years |
| 5. |
‘Development of Diffusion Absorption Cycle Based Solar Water Cooler and Refrigerator’ |
Council of Science & Technology, U.P. |
Two Years |
| 6. |
‘Modernization of Advanced Manufacturing Science Laboratory’ |
All India Council for Technical Education, Government of India |
Two Years |
| 7. |
Life Cycle Analysis of Biodiesel Fuels |
University Grants Commission, New Delhi |
Three Years |
| 8. |
Investigations on failure of Gas turbine blades |
All India Council for Technical Education, Government of India |
Two Years |
|
| |
Research Guidance :
- Guided 26 B. Tech. Projects
- Guided 20 M. Tech. Dissertations.
- Guided 12 Ph.D.
- Presently Guiding 04 Ph. D. students
Topics of the Ph.D. supervised – Name of Student
- Thermodynamic analysis of combined cycle gas/steam cycle and co-generation plants – SANJAY, 2005, UPTU, Lucknow
- Thermodynamic analysis of steam injected gas turbine and combined gas/steam cycle – JAGDISH PRASAD YADAV, 2006, UPTU, Lucknow
- Analysis and design of methodologies for software quality/reliability measures – RAGHURAJ SINGH, 2006, AKTU, Lucknow
- Design and Analysis of Air Engine – BHARAT RAJ SINGH, 2011, GBTU, Lucknow
- Development, characterization and performance evaluation of biodiesel – PRAVIN KUMAR SINGH, 2012, GBTU, Lucknow
- Comparative evaluation of CI engine performance and life cycle analysis for Jatropha, Karanja and Neem biodiesel fuels - ASHOK YADAV, 2012, GBTU, Lucknow
- Investigation into transpiration cooling of gas turbine blades used in gas/steam combined cycle power plants – SANJAY KUMAR, 2013, GBTU, Lucknow
- Thermodynamic analysis and optimization of heat recovery steam generator (hrsg) for gas/steam combined cycle – MEETA SHARMA, 2015, AKTU, Lucknow
- Modeling adaptive control of layer hardening of steel beams subjected to electromagnetic induction - MOHAN KRISHNA MISRA, 2016, AKTU, Lucknow
- Thermodynamic analysis of gas/steam combined cycle with different means of inlet air cooling - ANOOP KUMAR SHUKLA, 2017, AKTU, Lucknow
- Investigations on CI engine performance, emission and its limitation using biodiesels from Jatropha, Mahua and Neem oils in Indian conditions – MUKESH KUMAR, 2018, UTU, Dehradun
- Thermodynamic analysis of combined power cycle with ammonia water mixture for power generation- MAYANK MAHESHWARI, 2019, AKTU, Lucknow
Topics of the M.Tech. supervised – Name of Student
- Computer aided design of heat recovery steam generators, Rajeev Kumar, SR No. 731/00, 2002, M.Tech.-CAD, HBTI, Kanpur
- Computer aided design of vapour compression system and its optimization using genetic algorithm, Girish Kumar Verma, May 2003, M.Tech.-CAD, HBTI, Kanpur
- Development of software for computer aided design of centrifugal pump “PUMPCAD” and its’ optimization using genetic algorithm, Sanjay Kumar, Dec 2003, M.Tech.- CAD, HBTI, Kanpur
- Design and manufacturing of yoke, Ram Kumar Tyagi, SR No. 702/01, Dec 2003, M.Tech.-CAD, HBTI, Kanpur
- Modelling and structural analysis of propellant tank for a space launch vehicle, Ramendra Singh Niranjan, SR No. 702/03, 2005, M.Tech.-CAD, HBTI, Kanpur
- Computer simulation of thermodynamic analysis of film cooled of gas turbine blade, Anoop Kumar Shukla, SR No. 719/09, Jan, 2012, M.Tech.- CAD, HBTI, Kanpur
- Simulation studies of flow over gas turbine blade, Mragank Bajpai, SR No. 801/08, Jan 2012, M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
- Computer Aided Analysis of Vane Type Air Turbine, Kunwar Sandip, SR No. 702/08, Feb, 2011, M.Tech.- CAD, HBTI, Kanpur
- Development of software for life cycle analysis of jatropha biodiesel, Naveen Kumar Singh, SR No. 736/08, Feb, 2011, M.Tech.- CAD, HBTI, Kanpur
- Exergy analysis of steam injected gas turbine, Jayant Singh, SR No. 735/10, Oct,2012, M.Tech.- CAD, HBTI, Kanpur
- Investigation on performance improvement of diesel engine by use of biodiesel, Manish Kumar Pandey, SR No. 801/10, Sep, 2013, M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
- Modelling and analysis of integrated coal gasification combined cycle, Atul Rai, SR No. 807/05, May, 2012, M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
- Thermodynamic analysis of Kalina cycle, Mayank Maheshwari, SR No. 811/10, Sep 2013
- M.Tech.-Mechanical Engg. Design, HBTI, Kanpur
- Computer aided life cycle analysis of biofuel, Sandeep Singh, SR No.725/11, Nov, 2013
- M.Tech.- CAD, HBTI, Kanpur
- Computer aided thermodynamic analysis of gas turbine cycle for performance improvement through inlet air cooling, Priyanka Chaturvedi, SR No. 730/11, Nov, 2013, M.Tech.- CAD, HBTI, Kanpur
- Computer aided design and analysis of casing of medium capacity electrical motor, Ankur Srivastava, SR No. 723/11, Oct, 2013, M.Tech.- CAD, HBTI, Kanpur
- Fabrication and simulation of diffusion absorption refrigeration system, Kalyan Singh, Jan 2012, M.Tech.- CAD, HBTI, Kanpur
- Base line energy audit at m/s Llyods Steel Industries Limited, Wardha –a case study, Sudhir Kumar Bajpai, 2012, M.Tech.-Mechanical Engineering, Gautam Budha Technical University, Lucknow
- Computer Simulation of Solar Integrated Combined Power Cycle for Carbon
- Free Power and Heating – Jatin Sachdeva, 2018, HBTU, Kanpur, M.Tech.-CAD
- Computer Simulation of Solar Oxide Fuel Cell-Gas Turbine Organic Rankine Cycle Combined System – Ragini Singh, 2018, HBTU, Kanpur, M.Tech.-CAD
Collaborative Projects :
- “Design and Development of Lightweight Motorised Wheel Chair” in collaboration with Artificial Limbs Manufacturing Corporation Ltd.,Kanpur, 2008-09. Completed
- “Development of Solar powered tricycle for handicapped” in collaboration with Artificial Limbs Manufacturing Corporation Ltd., Kanpur. Completed
|
|
